Peanut Brittle (Easiest Microwave Recipe!) - Cooking Classy (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

In theory, it's a good idea, the baking soda adds some air to the caramelized sugar, making the sheets of candy more brittle, but it also introduces a minerally, metallic taste that's off putting to say the least. My version of peanut brittle is ridiculously simple to make, and leaves out the baking soda.

Peanut brittle should be cooked until it is hard and crunchy, not soft and chewy. Be sure to cook the candy for the full amount of time indicated in the recipe, or longer if necessary. You may need to experiment a bit to get the cooking time just right.

To accomplish this, spread a layer of wax paper along the bottom of your airtight container. Then add a layer of brittle, ensuring there is a bit of space between each piece. Next, add a second layer of wax paper and a second layer of brittle. Repeat the process until all your brittle is properly stored.

Reviving stale peanut brittle is possible to some extent. You can try placing the stale peanut brittle on a baking sheet and gently heating it in an oven at a low temperature, around 250°F (120°C), for a few minutes. This can help to soften it a bit and restore some of its original texture.

It's what's missing — corn syrup. A common brittle ingredient, Asare said, corn syrup causes brittle to go all gooey, gummy and tooth-clingy as it melts in your mouth, whereas sugar crunches, crumbles and dissolves.

History. The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

Didn't get it hot enough. You have to hit hard crack stage heat or it's not going to harden. From internet: Hard-Crack Stage is a cooking term meaning that a sugar syrup being heated has reached 149 – 154 C (300 – 310 F.) It is a test of how hot a sugar syrup is, and of how much water is left in it.

Can you use parchment paper when making peanut brittle? ›

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

To store: Once it's completely cooled, store peanut brittle in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To Freeze: Peanut brittle can be frozen and stored up to 3 months.

If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy. If you have this issue, next time, use a thermometer to make sure the peanut brittle mixture gets to 300°F.

To keep the brittle light and airy, do not spread or flatten the mixture.

Heavy 6 quart Dutch Oven pot. Mine is an old 1970's Club Aluminum. It's perfect! You need a heavy THICK pot so it won't scorch.

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

Dried peanuts may require boiling up to 24 hours until they soften. If your water is hard, full of minerals, or you are boiling at high altitude, then your boiling times for dried peanuts may be greater than 24 hours.

How long does it take for peanut brittle to harden? This microwave peanut brittle starts to harden almost immediately once you finish cooking it and stirring in the baking soda. It will be completely hardened and ready to break into pieces in just 30 minutes.